• 科氏力測量原理不受流體本身的物理性質（比如粘度和密度）影響。

• 適用于要求壓損低和緩流場合的液體和氣體測量。

設備特性

• 易清洗的單直管系統

• TMB®技術

• 測量管采用鈦合金材料制造

• 堅固的超緊湊型變送器外殼

• 高防護等級：IP69K

• 帶現場顯示

特征和規格

測量原理	科氏力質量流量計
產品標題	Combines in‐line viscosity and flow measurement with an ultracompact transmitter. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
傳感器特點	Energy‐saving – full bore design enables minimal pressure loss. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. Straight, easy cleanable single‐ ube system. TMB technology.
變送器特點	Space‐saving transmitter – full functionality on smallest footprint. Time‐saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology. Robust, ultra‐compact transmitter housing. High ingress protection: IP69.
公稱口徑范圍	DN 8 to 80 ( to 3")
接液部件材質	Measuring tube: Titanium grade 9 Connection: Titanium grade 2
測量變量	Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity
*大測量誤差	Mass flow (liquid): ±0.1 % Volume flow (liquid): ±0.1 % Mass flow (gas): ±0.5 % Density (liquid): ±0.0005 g/cm³
測量范圍	0 to 180 000 kg/h (0 to 6600 lb/min)
*大過程壓力	PN 100, Class 600, 63K
介質溫度范圍	–50 to +150 °C (–58 to +302 °F)
環境溫度范圍	Standard: –40 to +60 °C (–40 to +140 °F) Option: –50 to +60 °C (–58 to +140 °F)
傳感器外殼材質	1.4301/1.4307 (304L), corrosion resistant
變送器外殼材質	Compact: AlSi10Mg, coated Compact/ultra‐compact: 1.4301 (304)
防護等級	Standard: IP66/67, type 4X enclosure Option: IP69
顯示/操作	4‐line backlit display available (no local operation) Configuration via web browser and operating tools possible
輸出	4‐20 mA HART (active) Pulse/frequency/switch output (passive)
輸入	None
數字式通信	HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET
電源	DC 20 to 30 V
危險區認證	ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC
產品安全性	CE, C-Tick, EAC marking
計量認證和證書	Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)  Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV Attestation)
壓力認證和證書	PED, CRN
船級證書	3.1 material
衛生型認證和證書	3-A, EHEDG