• 測量原理不受流體物理特性的影響（例如粘度或密度）

• 在標準應用場合中進行液體和氣體的高精度測量。

儀表特點

• 緊湊的雙測量管傳感器

• 介質溫度：*高+150 °C (+302 °F)

• 過程壓力：*大100 bar (1450 psi)

• 堅固耐用的超緊湊型一體式變送器外殼

• 高防護等級：IP69

• 提供現場顯示單元

特征和規格

測量原理科氏力質量流量計產品標題The flowmeter with minimized total cost of ownership and an ultra-compact transmitter. Accurate measurement of liquids and gases for a wide range of standard applications.
傳感器特點Cost-effective – multi-purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F).
變送器特點Space-saving transmitter – full functionality on the smallest footprint. Time-saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology. Robust, ultra-compact transmitter housing. High ingress protection: IP69.
公稱口徑范圍DN 8 to 80 ( to 3")
接液部件材質Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
測量變量Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
*大測量誤差Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option) 
Volume flow (liquid): ±0.15 % 
Mass flow (gas): ±0.75 % 
Density (liquid): ±0.0005 g/cm³
測量范圍0 to 180 000 kg/h (0 to 6600 lb/min)
*大過程壓力PN 100, Class 600, 63K
介質溫度范圍–40 to +150 °C (–40 to +302°F)
環境溫度范圍Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140°F)
傳感器外殼材質1.4301 (304), corrosion resistant
變送器外殼材質Compact: AlSi10Mg, coated
Compact/ultra‐compact: 1.4301 (304)
防護等級Standard: IP66/67, type 4X enclosure
Option: IP69
顯示/操作4‐line backlit display available (no local operation)
Configuration via web browser and operating tools possible
輸出4‐20 mA HART (active)
Pulse/frequency/switch output (passive)
輸入None
數字式通信HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET
電源DC 20 to 30 V
危險區認證ATEX, IECEx, cCSAus, INMETRO, NEPSI
產品安全性CE, C-Tick, EAC marking
計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) 
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV Attestation)
壓力認證和證書PED, CRN
船級證書3.1 material
衛生型認證和證書3-A, EHEDG